« Importing Members from a File   |   Importing Members from Clipboard »

Exporting Members to Clipboard

Administrator
This manual is in pilot operation.

To export member configuration data of a Dimension to the clipboard, first log in to [Manager] and select the target application. Then follow these steps to export:

Exported data can be pasted into a Microsoft Excel sheet, edited, and then imported back via the clipboard.

You can export members from either the Dimension (Design) Panel or the Dimension (Maintenance) Panel. The functionality is the same in both cases.

  1. Select the dimension to configure and display the Dimension (Maintenance) Panel (for steps, refer to Viewing Dimensions).

  2. (fusion_place >= 12.2) Ensure that Member Exporting Formats are properly set (this step can be skipped if already configured correctly).

  3. Click the To Clipboard button at the bottom-right of the screen.

    A "Processing Status" dialog box will appear, and after some time, the process will complete. At this point, the members have been exported to the clipboard.

  4. In a Microsoft Excel sheet, select an appropriate cell (the top-left cell of the range where you want to paste the exported data), and press Ctrl+V. You may also use Excel’s menu and select Edit(E)  Paste(P) or similar options.

    The exported data will be pasted into the sheet.