« View the Dimension Settings   |   Deleting Dimensions »

Setting Dimensions

Designer
This manual is in pilot operation.

To set Dimensions, log in as a [Manager] and select the target application. Then, follow the steps below to set the dimensions.

  1. Select the dimension you want to configure and display the Dimension (Design) panel (refer to "Viewing Dimensions" for the procedure).

  2. Switch between the panels for Basic Information, Members, Properties, and Member List, and configure the necessary items.

    Refer to the "Description of the Dimension (Design) Panel" for details on the settings and operations available in each panel.

  3. To save the settings, click the Save button.

When you add a member in the Dimension (Design) panel, the Member Type will always be set to "Template." You can later change the Member Type to "User Defined," but if you do, you will no longer be able to operate that member in the Dimension (Design) panel (the only possible operation will be to change the Member Type back to "Template").
To operate user-defined members, use the "Dimension (Maintenance)" panel from the maintenance tree.